PlumBud differs from TileBud in that the Sealux strip is supplied with the backer rod attached.
A longitudinal adhesive bed (under the blue release liner) defines the boundary line between the strip upper portion that is permanently bonded to the shower wall and the strip lower strip portion that is releasable off the shower wall to relieve strip stress under the effects of joint expansion.
HydroHalt PlumBud presents the Sealux strip and backer rod as a co-bonded sealing assembly which limits its use to installation with upstand free shower bases and bathtubs being installed into one and two wall shower enclosures.
PlumBud Installation Accessories
Backer Rod Alignment Guide
PlumBud must be installed during installation of shower trays and baths. Where PlumBud is being installed onto 3 sides of a shower tray or bath, ensure the enclosure width is 12mm wider than the shower tray or bath width.
PlumBud is available in lengths between 2mtrs. and 3.8mtrs. Installation accessories include 2 alcohol surface wipes, backer rod alignment guide and sealant spatulas. Sealux-N silicone is not supplied in the kit but can be included in the box upon request.